Painting patterns has become one of my favourite things to do while watching movies. I find it very calming, similar to those colouring books which were very popular for a while. Its fun and literally the easiest thing to do. If you can hold a paintbrush you can do this.

Ravelry is a community site, an organizational tool, and a yarn & pattern database for knitters and crocheters. Many patterns contain multiple sizes printed on one pattern tissue or PDF and have different dashed lines to indicate the size selection. It’s a good idea to go over the lines you want to use with a pen — I find colored pencils great for this task as they are soft, mark on the paper or tissue easily and don’t run through the paper as marking pens do.

How To Make Paint Patterns

HOW TO PAINT PATTERNS ON PAPER

SUPPLIES

• Paper. The type of paper you buy will depend on the sort of paint you use. I prefer to use some sort of watercolour paper. But you should also keep in mind what you will be using the paper for. Thick watercolour paper isn’t the best if you’re wanting to use the patterns as wrapping paper.
• Paintbrushes. Any sort of paintbrush will work. You may want to get a finer paintbrush if you have a very intricate pattern.
• Pencils and ruler. These will be really useful if you want to draw your pattern before painting it. Depending on the complexity of the pattern you may want to try different versions in a sketchbook before choosing your favourite.
• Paint. This depends entirely on the sort of look you want your pattern to have. Watercolour is more transparent, gouache is more opaque.

PAINT PATTERNS

• Draw any kind of pattern you want. The one I am doing is based on a duvet cover I saw in IKEA.
• Paint!

And voilà. You made a pattern. Don’t worry about it being perfect. I find the imperfections make the pattern more interesting to look at. You can also use decorative paper punches to make a stencil to trace around. Just like the ones I have done below. If you really wanted to you could transfer these patterns onto large sheets of paper and create your own wrapping paper. If you have the supplies lying around this would be much cheaper than buying your own wrapping paper. It would also make the gift even more special because you make part of it yourself.

EXAMPLES

The options pattern uses classes to provide strongly-typed access to groups of related settings. When configuration settings are isolated by scenario into separate classes, the app adheres to two important software engineering principles:

• The Interface Segregation Principle (ISP) or Encapsulation: Scenarios (classes) that depend on configuration settings depend only on the configuration settings that they use.
• Separation of Concerns: Settings for different parts of the app aren't dependent or coupled to one another.

Options also provide a mechanism to validate configuration data. For more information, see the Options validation section.

Bind hierarchical configuration

The preferred way to read related configuration values is using the options pattern. The options pattern is possible through the IOptions<TOptions> interface, where the generic type parameter TOptions is constrained to class. The IOptions<TOptions> can later be provided through dependency injection. For more information, see Dependency injection in .NET.

For example, to read the following configuration values:

Create the following TransientFaultHandlingOptions class:

When using the options pattern, an options class:

• Must be non-abstract with a public parameterless constructor
• Contain public read-write properties to bind (fields are not bound)

The following code:

• Calls ConfigurationBinder.Bind to bind the TransientFaultHandlingOptions class to the 'TransientFaultHandlingOptions' section.
• Displays the configuration data.

In the preceding code, changes to the JSON configuration file after the app has started are read. Kon boot 2.3 iso free download.

ConfigurationBinder.Get<T> binds and returns the specified type. ConfigurationBinder.Get<T> may be more convenient than using ConfigurationBinder.Bind. The following code shows how to use ConfigurationBinder.Get<T> with the TransientFaultHandlingOptions class:

In the preceding code, changes to the JSON configuration file after the app has started are read.

Important

The ConfigurationBinder class exposes several APIs, such as .Bind(object instance) and .Get<T>() that are not constrained to class. When using any of the Options interfaces, you must adhere to aforementioned options class constraints.

An alternative approach when using the options pattern is to bind the 'TransientFaultHandlingOptions' section and add it to the dependency injection service container. In the following code, TransientFaultHandlingOptions is added to the service container with Configure and bound to configuration:

Tip

The key parameter is the name of the configuration section to search for. It does not have to match the name of the type that represents it. For example, you could have a section named 'FaultHandling' and it could be represented by the TransientFaultHandlingOptions class. In this instance, you'd pass 'FaultHandling' to the GetSection function instead. The nameof operator is used as a convenience when the named section matches the type it corresponds to.

Using the preceding code, the following code reads the position options:

In the preceding code, changes to the JSON configuration file after the app has started are not read. To read changes after the app has started, use IOptionsSnapshot.

Options interfaces

IOptions<TOptions>:

• Does not support:
  • Reading of configuration data after the app has started.
• Is registered as a Singleton and can be injected into any service lifetime.

IOptionsSnapshot<TOptions>:

• Is useful in scenarios where options should be recomputed on every injection resolution, in scoped or transient lifetimes. For more information, see Use IOptionsSnapshot to read updated data.
• Is registered as Scoped and therefore cannot be injected into a Singleton service.
• Supports named options

IOptionsMonitor<TOptions>:

• Is used to retrieve options and manage options notifications for TOptions instances.
• Is registered as a Singleton and can be injected into any service lifetime.
• Supports:
  • Change notifications
  • Selective options invalidation (IOptionsMonitorCache<TOptions>)

IOptionsFactory<TOptions> is responsible for creating new options instances. It has a single Create method. The default implementation takes all registered IConfigureOptions<TOptions> and IPostConfigureOptions<TOptions> and runs all the configurations first, followed by the post-configuration. It distinguishes between IConfigureNamedOptions<TOptions> and IConfigureOptions<TOptions> and only calls the appropriate interface.

IOptionsMonitorCache<TOptions> is used by IOptionsMonitor<TOptions> to cache TOptions instances. The IOptionsMonitorCache<TOptions> invalidates options instances in the monitor so that the value is recomputed (TryRemove). Values can be manually introduced with TryAdd. The Clear method is used when all named instances should be recreated on demand.

Options interfaces benefits

Using a generic wrapper type gives you the ability to decouple the lifetime of the option from the DI container. The IOptions<TOptions>.Value interface provides a layer of abstraction, including generic constraints, on your options type. This provides the following benefits:

• The evaluation of the T configuration instance is deferred to the accessing of IOptions<TOptions>.Value, rather than when it is injected. This is important because you can consume the T option from various places and choose the lifetime semantics without changing anything about T.
• When registering options of type T, you do not need to explicitly register the T type. This is a convenience when you're authoring a library with simple defaults, and you don't want to force the caller to register options into the DI container with a specific lifetime.
• From the perspective of the API, it allows for constraints on the type T (in this case, T is constrained to a reference type).

Use IOptionsSnapshot to read updated data

When you use IOptionsSnapshot<TOptions>, options are computed once per request when accessed and are cached for the lifetime of the request. Changes to the configuration are read after the app starts when using configuration providers that support reading updated configuration values.

The difference between IOptionsMonitor and IOptionsSnapshot is that:

• IOptionsMonitor is a singleton service that retrieves current option values at any time, which is especially useful in singleton dependencies.
• IOptionsSnapshot is a scoped service and provides a snapshot of the options at the time the IOptionsSnapshot<T> object is constructed. Options snapshots are designed for use with transient and scoped dependencies.

The following code uses IOptionsSnapshot<TOptions>. Adobe zii 2015.

The following code registers a configuration instance which TransientFaultHandlingOptions binds against:

In the preceding code, changes to the JSON configuration file after the app has started are read.

IOptionsMonitor

The following code registers a configuration instance which TransientFaultHandlingOptions binds against.

The following example uses IOptionsMonitor<TOptions>:

In the preceding code, changes to the JSON configuration file after the app has started are read.

Tip

Some file systems, such as Docker containers and network shares, may not reliably send change notifications. When using the IOptionsMonitor<TOptions> interface in these environments, set the DOTNET_USE_POLLING_FILE_WATCHER environment variable to 1 or true to poll the file system for changes. The interval at which changes are polled is every four seconds and is not configurable.

For more information on Docker containers, see Containerize a .NET app.

Named options support using IConfigureNamedOptions

Named options:

• Are useful when multiple configuration sections bind to the same properties.
• Are case-sensitive.

Consider the following appsettings.json file:

Rather than creating two classes to bind Features:Personalize and Features:WeatherStation,the following class is used for each section:

The following code configures the named options:

The following code displays the named options:

All options are named instances. IConfigureOptions<TOptions> instances are treated as targeting the Options.DefaultName instance, which is string.Empty. IConfigureNamedOptions<TOptions> also implements IConfigureOptions<TOptions>. The default implementation of the IOptionsFactory<TOptions> has logic to use each appropriately. The null named option is used to target all of the named instances instead of a specific named instance. ConfigureAll and PostConfigureAll use this convention.

OptionsBuilder API

OptionsBuilder<TOptions> is used to configure TOptions instances. OptionsBuilder streamlines creating named options as it's only a single parameter to the initial AddOptions<TOptions>(string optionsName) call instead of appearing in all of the subsequent calls. Options validation and the ConfigureOptions overloads that accept service dependencies are only available via OptionsBuilder.

OptionsBuilder is used in the Options validation section.

Use DI services to configure options

Services can be accessed from dependency injection while configuring options in two ways:

• Pass a configuration delegate to Configure on OptionsBuilder<TOptions>. Diablo ii item pack. OptionsBuilder<TOptions> provides overloads of Configure that allow use of up to five services to configure options:

• Create a type that implements IConfigureOptions<TOptions> or IConfigureNamedOptions<TOptions> and register the type as a service.

We recommend passing a configuration delegate to Configure, since creating a service is more complex. Creating a type is equivalent to what the framework does when calling Configure. Calling Configure registers a transient generic IConfigureNamedOptions<TOptions>, which has a constructor that accepts the generic service types specified.

Options validation

Options validation enables option values to be validated.

Can I Wear Pattern On Pattern

Consider the following appsettings.json file:

The following class binds to the 'Settings' configuration section and applies a couple of DataAnnotations rules:

The following code:

• Calls AddOptions to get an OptionsBuilder<TOptions> that binds to the SettingsOptions class.
• Calls ValidateDataAnnotations to enable validation using DataAnnotations.

The ValidateDataAnnotations extension method is defined in the Microsoft.Extensions.Options.DataAnnotations NuGet package.

The following code displays the configuration values or the validation errors:

The following code applies a more complex validation rule using a delegate:

IValidateOptions for complex validation

The following class implements IValidateOptions<TOptions>:

IValidateOptions enables moving the validation code into a class.

Using the preceding code, validation is enabled in ConfigureServices with the following code:

Options post-configuration

Set post-configuration with IPostConfigureOptions<TOptions>. Post-configuration runs after all IConfigureOptions<TOptions> configuration occurs, and can be useful in scenarios when you need to override configuration:

PostConfigure is available to post-configure named options:

Use PostConfigureAll to post-configure all configuration instances:

See also